- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
This tester is to perform three-wheel-test as per CQM requirement. A card is positioned in the tester such that the rollers will cycle 100 times over front (50) and then back(50)of IC with a cycle frequency of 0.5HZ and a downward force of 8N. After the test, IC should be intact and functional. Additional weight 15N is included.
How to use:
1. Put a card into the tester and fasten the card, make sure the IC is under tester head.
2. Power on the tester and set test number on counter, start test.
Calibration
In case of calibration is needed. This tester is only need to check weight. Use scale to check the weight to see if it is 8 ± 0.5N and 15± 0.5N (total weight should include tester head).
This tester is to perform three-wheel-test as per CQM requirement. A card is positioned in the tester such that the rollers will cycle 100 times over front (50) and then back(50)of IC with a cycle frequency of 0.5HZ and a downward force of 8N. After the test, IC should be intact and functional. Additional weight 15N is included.
How to use:
1. Put a card into the tester and fasten the card, make sure the IC is under tester head.
2. Power on the tester and set test number on counter, start test.
Calibration
In case of calibration is needed. This tester is only need to check weight. Use scale to check the weight to see if it is 8 ± 0.5N and 15± 0.5N (total weight should include tester head).
